Product Details:
Minimum Order Quantity | 1 Piece |
Automation Grade | Automatic |
Frequency | 50 hz |
Phase | 3 |
Capacity | 300 amp |
Warranty | 2year |
Technique | auto |
Weight | 55kg |
Dimension | 1000/300 |
Material | fider |
Brand | migatronic |
Air Consumption | yes |
Output Current | 200-300 A |
Voltage | 420 vac |
Plasma , TIG, MMA - Pulse, Quick Pulse, Synergy PlustmTM, Automation. Pi 350 Plasma – welding automation with or without pulse:
New Pi 350 Plasma increases productivity:The Pi 350 Plasma is a high-performance water-cooled welding inverter dedicated to plasma welding in auto-mated welding processes in the current range 5-350 A. The Pi 350 Plasma welds sheet metals in up to 8 mm mild steel and 10 mm stainless steel.
The machine welds with three optional pulse functions:Traditional pulse, quick pulse, Synergy PLUS™ – or without pulse - using all plasma processes: plasma-melt, plasma-press and plasma-keyhole welding. In TIG welding, the output is up to 500 A.
Features of the digital Pi 350 plasma inverter:
- Electronic control of gas flow and water flow in the torch
- Built-in gas-saver kit
- CAN-BUS communication
- 100% duty cycle in plasma welding
- Remote control kit
- Diffusion-safe gas hose
- Pilot arc – safe ignition
Protected tungsten electrodes – longer life:The plasma torch protects the tungsten electrode against weld spatter and prevents it from sticking to the weld pool. Interruption of operations for grinding the electrodes is minimized and life is considerably longer than in TIG welding.
Facts about plasma welding:
- Efficient welding with full penetration: mild steel up to 8 mm, stainless steel up to 10 mm
- Protected tungsten electrodes: longer life, fewer interruptions of operations
- Low heat input: minimal deformation of work piece/material
- Safe ignition with Pilot arc - always ready for next welding cycle
- Welding consumables: no waste – wire from spool via CWF Multi
Increased welding speed – less post-treatment:Pi 350 Plasma in automated setup is the optimal solution to rationalisation of welding processes in modern production.
- Reduced tact time per work piece
- Longer life and reduced tungsten consumption
- Simple groove geometry and less preprocessing
- Lower welding current – less deformation and post-treatment – better finish
- Lower current consumption and CO2-emission
- Shielding during welding: better personal safety
- A minimum of welding fumes makes for better working environment
Simple operation of advanced welding processes:The control panel is logical and easy to use with direct choice of processes. Up to 64 programs can be stored in Plasma and TIG. The machine has a port for remote control and Arc Detect, and a special solution it can be equipped with an extra control panel with identical functions and facilities for the welder at the automatic device.
Complete setup:The CWF Multi is a separate wire feed unit designed specifically for setups with automatic devices. As a curiosity, the unit can also be used for manual TIG/ plasma welding using handheld torches. CWF Multi and Pi 350 Plasma can be operated separately or synchronously with interaction between welding current and wire-feeding. Yet another example of Migatronic’s idea of user-friendliness, just switch on, press and weld.
Additional Information: